Magclamps

Magclamps

Magclamps

The Magclamp© system has two standard sizes 63mm diameter by 14mm with a 35Kg pull and 80mm diameter by 18mm with a 60Kg pull. These are ferrite C5 magnets. Choosing your Magclamp©

Measure the OD of the pipe or cable and decide on the clamp diameter required e.g. A ¾” internal bore hydraulic hose will measure OD approx 30mm (depending on manufacturer) so a 26-32mm clamp will fit. Based on your application, choose between the close coupled, extended 100mm straight or 90 degree options. For flexible pipes we advise to space every 1 to 2 metres for parallel runs.

Technical Data:

Ferrite magnets can be used up to +180 degrees C but may start to show some signs of weakening (demagnetization) when used in sub-zero conditions e.g. -10 to -20 deg C. The design and application determines the actual optimal operating temperature range. The optimum pull force of the magnet is released when the surface is made of steel and is flat, clean and has a thick cross section. For example a magnet may exert a force of 25kg on a 1mm thick piece of steel metal but exert a force 250kg on a sheet of steel plate greater than 10mm thick.

DISTRIBUTORS REQUIRED PLEASE CONTACT US FOR ADDITIONAL DETAILS.


Display per page
Sort by
Product no.: M35/CC

The M35 Closed Couple range, the smallest for the Magclamp Range. The M35 magnets each have a pull for 35Kg.

In stock

Product no.: M35/100ST

Ideal for temporarily securing pipes, hoses, cables etc. to any magnetic surface to keep areas tidy and hazard free. (BULK DISCOUNT APPLIES)

In stock

Product no.: M35/100L

Magclamp with magnet pull of 35Kg  and 100mm x 100mm 90 degee extended bar to keep walkways clear of trip hazards. (BULK DISCOUNT APPLIES)

In stock
can be shipped within 1-3 days

Product no.: M60/CC

Magclamps provide the ideal way of securing pipes and hoses as well as keeping walkways free of hazards. M60 Magclamps have a pull of 60Kg

In stock
can be shipped within 1-3 days

Product no.: M60/100ST

Magclamps provide the ideal way of securing pipes and hoses as well as keeping walkways free of hazards. M60 Magclamps have a pull of 60Kg

In stock

Product no.: M60/100L

Magclamps provide the ideal way of securing pipes and hoses as well as keeping walkways free of hazards. M60 Magclamps have a pull of 60Kg

In stock
can be shipped within 1-3 days

* Prices plus VAT, plus delivery