How Clean is Your Oil?
Carry Case Sampling Kit
FA-ST supply a range of Sampling Carry Case Kits providing everything you need to take oil, glycol, water and diesel fuel samples. Kits can also be designed to suit a customers own requirements. Clear PETG bottles, opaque HDPE and glass bottles are avaialble in many different sizes.
Kits can be modified for chemical sampling please contact us for details.
Our own design...Tank Bottom Sampler..simply attach the sampler to the sample tubing, attach the other end to the vacuum sampling pump and sampling bottle, place the weighted sampler in the tank and the tank bottom sampler will sink to the bottom. Simple method to check for water and dirt contamination at the lowest part of the system.
STOP USING RAGS and switch to Environmentally friendly wipes made from bamboo that will out perform polypropylene (plastic) wipes. Also reduce waste as these are recyclable.
Magnetic Filters are ideal to remove Ferrous contaminates from fluids. Protect your equipment with the MicroMag Filters.
Magnetic Clamps
FA-ST has a range of magnetic clamps to allow for improved site safety
Categories Sampling Equipment Sampling Tubing
Sampling Tubing
When taking oil samples new sampling tubing should be used on every sample to prevent cross contamination affecting your analysis results. FA-ST provides a range of sampling tubing suitable for extracting samples from all types machinery, tanks, filters, draw off points or any where else samples need to be taken. Our narrow bore tubing is especially useful for taking samples from engine dipstick tubes and is very popular with boat owners, marine surveyors, automotive and motor sport industries. The large bore tubing is suitable for very viscous fluids and grease sampling.
|
Product no.: ST5/3NB13
Narrow Bore Sample Tubing. Ideal for small apertures in tanks and for the engine dipstick tubes on cars and boats. (BULK DISCOUNT APPLIES) |
£7.65
*
Delivery weight: 100 g
In stock |
|
|
|
|
Product no.: ST5/3NB30
Narrow Bore Sample Tubing. Ideal for small apertures in tanks and for the engine dipstick tubes on cars and boats. (BULK DISCOUNT APPLIES) |
£12.99
*
Delivery weight: 1 kg
In stock |
|
|
|
|
Product no.: ST6/5
Standard Sample Tubing semi-rigid (15 metre coil) to allow samples to be taken on all viscosity oils and fluids. (BULK DISCOUNT APPLIES) |
£8.05
*
Delivery weight: 170 g
In stock |
|
|
|
|
Product no.: ST6/4MDPE30
Standard Sample Tubing semi-rigid (15 metre coil) to allow samples to be taken on all viscosity oils and fluids. (BULK DISCOUNT APPLIES) |
£13.05
*
Delivery weight: 600 g
In stock |
|
|
|
|
Product no.: ST7/5PVC30
Sampling tubing 30 metre coil in a very flexible clear PVC 7mm OD x 5mm ID. This tubing fits all our vacuum sampling pumps and SY60 syringes |
£12.70
*
Delivery weight: 1 kg
In stock |
|
|
|
|
Product no.: SIL7/4
Silicone tubing 5 metre roll, recommended for sampling of chemical based substances (OD 7mm ID 4mm approx.) |
£9.05
*
Delivery weight: 200 g
In stock |
|
|
|
|
Product no.: ST8/6LB10
Large Bore Sampling Tubing 10 metre roll, Ideal for taking samples on high viscosity Oils, Grease and other Fluids. (BULK DISCOUNT APPLIES) |
£12.15
*
Delivery weight: 240 g
In stock |
|
|
|
|
Product no.: TBS1-MDPE
Designed to hold sample tubing and pull it to the bottom of the tank allowing for the extraction of oil or diesel at the bottom. |
£14.99
*
Delivery weight: 100 g
In stock |
|
|
|
|
Product no.: STM40
Minimess Female to open end sample point with a 0.40 meter minmess hose attachment allowing for easy oil samples to be taken. |
£14.75
*
Delivery weight: 45 g
In stock |
|
|
|
|
Product no.: TCP15
Tube cutter for cutting oil sample tubing to size. Gives a neat clean angled cut and is simple and safe to use. |
£5.29
*
Delivery weight: 35 g
In stock |
|
|
|