- Stored/ remaining fuel in the fuel tanks remain protected against microbes for long periods.
- Immediately rids all contamination and prevents the re-generation of microbes.
- Hydra FuelPlus Biocide is soluble in both fuel and water phases for better and efficient killing.
- No more fuel lines or filters that are blocked. Prevents clogging of injectors. Prevents failures of fuel system.
- Cut’s down expensive maintenance cost of bunker fuel and improves fuel economy.
- Safe to use as non–flammable, non-toxic, non-corrosive. Totally combustible in fuel mixture.
Shock / Initial Dose: 1: 3000 (30 ml per 100 litre fuel)
For already microbe contaminated Fuel System
Add to the existing fuel tanks at recommended dosage to kill off all damaging microbial growth.
Refueling Dose: 1:10000 (10 ml per 100 litre)
To Protect Clean Fuel System
Add the recommended refueling dose in the tank before topping up with fresh supply. Ensure the addition of treatment refueling dose every time the tank is topped up.
Fuels left for storage in fuel tanks will always contain some water. The amount of water present will gradually increase with time. The longer the fuel is left undisturbed the more water it will contain.
As freshly refined fuel cools down, its water solubility decreases. Henceforth, moisture, which was previously dissolved in the fuel begins to drop out of the fuel. This process continues throughout the fuel’s cooling process even during transport. As fuel’s specific gravity is lower than that of water, as dissolved water condenses it tends to drop out of fuel, accumulating in tank bottoms and in pipeline low-points.
Fuels are usually stored for a considerably long time before it reaches the customer therefore will always contain some water. Biological diesels such as (FAME) tend to hold more water than the conventional diesels. The accumulated water is an ideal environment for the microbes to thrive and contaminate the fuel severely compromising the consistency and quality of the fuel.
Thus technical challenges are faced by Company’s in bulk storage and in vehicles, since all fuels types especially low sulphur and biological diesel can exhibit particular problems which cause difficulties in operation.
The fuels in storage, especially bio-diesel can absorb moisture from its surroundings, this can lead to microbial infestation and fuel bug issues. Fuel tanks/storages in hot countries can accumulate nearly 0.1% water depending on the volume and type of the fuel as a result of condensation during long-term storage.
Microbial infestation including growth of microbes such as moulds, fungi and bacteria if left untreated during long term storage, can severely affect the fuel quality. This microbial attack leads to degradation of fuel, decreased in lubricity as fuel additives are broken down by the harmful microbes.