9758 Micro Engine Bypass Filter Unit

The 9758 Micro Engine Bypass filter is the smallest of the FA-ST Engine Bypass Filters: H160mm x D90mm

The unit is ideal for engines with a sump of up to 6 litres and will remove 0.15 litres of water per filter cartridge as well as 150g of particulate contaminate.The 9758 housing is for use with small cars, light commercials vehicles and vans, small generators, forklifts and 4WD’s with very tight space. For engines with an oil pan capacity of 5.5 litres (6 quarts). The unit is manufactured from a solid aluminium and is lathe turned and machined. Suitable for all types of engine oils and can also be used on diesel fuel and light hydraulic oil up to 32 viscosities

*****PLEASE NOTE this housing does not need or supplied with the standard O rings fitted with our other housings*****

• Flow Rate: Output levels are dependent on the viscosity, temperature, and degree of contamination and oil pressure. (Guide for SAE 15W40 oil at 158 degrees F and 60psi, the flow rate would be approx 4 to 7 litres per minute)
• Operating Temperatures: Within operating specifications of engine, gear, and hydraulic oils.
• Operating Pressures: Maximum rating of 10 bar. Lid torque is 23 lbs/foot

Replacement Filter Cartridge for 9758

1858 filter cartridges: with dirt retention capacity of approx. max 150 g solid particles and approx max 150 ml water. These cartridges come supplied as single filters or boxed quantity of 12.

All boxes and individual cartridges contain spare lid seals for filter housings. Cartridges filter fineness of 1μm nom, 3μm absolute. Temperature operating range 0-135°C, +/- 5°C. The stated volumes of oil are only relative to installation of single filter housing. All cartridges are protected by a nylon outer cover with pressed brass ring holder.

On installation the BRASS RINGS MUST BE FACING UPWARDS

Filtration Level: Particulate contamination in accordance with BS 5540 part 4: 1981 and ISO/DIS 4406. ISO 14/9 equivalent to NAS 1638 class 6 - hydraulic oil specification.